CEG:Defs

CEG Classes

Source

The engine source code which loads the tags from these files is viewable here:

• rts/Sim/Projectiles/
• rts/Sim/Projectiles/Unsynced/

Overall Format

A CEG file contains one or more CEGs. Each CEG follows this format:

["ceg_name"] = {
  useDefaultExplosions = false,
  spawner1_name = {
    class         = "CClassName",
    count              = 1,
    air                = true,
    ground             = true,
    water              = true,
    properties = {
      -- ... See tags below
      },
    },
  },
  spawner2_name = {
    -- each spawner follows the above format
  },
  groundflash = {
    -- groundflash is a special name; it always generates a groundflash
    -- groundflash properties
  },
}

bool useDefaultExplosions  default: false 

If this is set, the CEG will use the default explosion (based on damage and area of effect) in addition to any spawners you define. The default explosions are sometimes very performance heavy, especially for large damage values (leading to higher particle counts).

Spawners

A CEG can contain any number of spawners. The name of the spawners don't really matter, as long as it's not groundflash, which has a special meaning. You can think of each spawner as being one component of the overall explosion.

string class  default: ??? 

Each spawner has a class that determines what kind of graphical effect it creates. Spring has a number of standard classes that you can choose from. See CEG-Classes for details.

int count  default: 1 

The count determines the number of times the spawner will run.

Conditions

These determine under what conditions the spawner will run. If you set the condition to true, the spawner will run if the explosion takes place under that condition. If you set more than one condition, the spawner will run if any of them are true. If you want a spawner to run only if two or more conditions are all true, you have to do a little trick with the CExpGenSpawner class FIXME: What is the trick?.

bool air  default: false 

The CEG will run if at least 20 elmos above ground/sea level.

bool water  default: false 

The CEG will run if in water to a depth of -5 elmos.

bool underwater  default: false 

The CEG will run if under water deeper than 5 elmos.

bool ground  default: false 

The CEG will run if less than 20 elmos above ground.

bool unit  default: false 

The CEG will run if the weapon hits a unit.

bool nounit  default: false 

The CEG will run if the weapon does not hit a unit.

Properties

Depending on what class a spawner is, it will have a set of properties that allow you to fine-tune what the spawner displays. Again, see CEG-Classes for details.

groundflash

If you name a spawner "groundflash," it will always generate a groundflash. Suggested Use: A short groundflash (~8 frames) is good for any explosion that gives off light. You can also use a longer groundflash to suggest the ground is glowing from heat. A groundflash has the following properties:

float flashSize  default: 0.0 

The radius of the groundflash.

float flashAlpha  default: 0.0 range: [0, 1] 

How transparent the groundflash is. Generally the higher the brighter.

float circleGrowth  default: 0.0 

A groundflash can have an additional circle that expands outwards. This controls how fast the circle grows.

float circleAlpha  default: 0.0 range: [0, 1] 

How transparent the circle is.

int ttl  default: 0 

How long the groundflash lasts.

rgb color  default: {1.0, 1.0, 0.8} 

The color of the groundflash.

Data Types

CEGs use the following data types:

int

An integer number. eg. 5

float

A number with decimals. eg 1.023

bool

A value which can be true or false. eg true

string

Text, or more precisely a string of alphanumeric characters. eg "string of characters"

rgb

Three float components, representing red, green and blue components, ranged from 0.0 to 1.0. eg {0.0, 0.0, 0.0}

float3

Three float components, eg {0.0, 0.0, 0.0}

float4

Four float components, eg {0.0, 0.0, 0.0, 0.0}

You can use CEG-Operators to define floats that are not fixed.

Units

All distances are in elmos; all time is in frames.

CEG Textures

• Textures on CEG definitions are referenced by name.
• The list of available textures and their names should be in resources.lua
• Texture definitions to be used in projectile classes should be placed within the "projectiletextures" category and textures to be used with #CSimpleGroundFlash class should be placed within the "groundfx" category.
• Texture images are usually placed in the "bitmaps" subfolder.

Common Properties

All classes have the following properties, although not all of them use them:

bool alwaysVisible  default: false 

If true, the spawner is always visible, ignoring LoS.

bool useAirLos  default: false 

Whether the spawner uses air LoS to determine if it is visible. This may allow the spawner to be seen from a further distance than normal.

float[3] pos  default: {0.0, 0.0, 0.0} 

The initial position vector of the spawner.

float[3] speed  default: {0.0, 0.0, 0.0} 

The initial speed vector of the spawner.

float[3] dir  default: ? 

The initial direction vector of the spawner.

CExpGenSpawner

This is the closest thing CEG has to a function call. Instead of creating a graphical effect on its own, it creates another CEG.

Suggested Use

• If you use a spawner a lot of times, you may want to make it a separate CEG to avoid having to copy-paste many times.
• This is the only way to truly delay a graphical effect.
• The spawned CEG still checks conditions, so if you want to, say, spawn an effect only if it is in water and doesn't hit a unit, you can give the CExpGenSpawner nounit = 1; and the spawned CEG water = 1;.
• This allows you to give a set of spawners the same (and possibly random) direction.
• You can animate an explosion flip-book style using delays and several bitmaps.

Properties

int delay  default: 1 

How long to wait (in frames?) before spawning the CEG.

float damage  default: 0.0 

The CEG will be called with this damage. The CEG doesn't actually deal any damage, but you can use this as a parameter and read it using the 'd' operator.

string explosionGenerator  default: "" 

The name of the CEG you want to spawn.

CBitmapMuzzleFlame

This creates three rectangular textures at right angles to each other. The frontTexture has dir as its normal.

Suggested Use

• Muzzle flames, obviously.
• You can use an upward-pointing CBitmapMuzzleFlame as a simple splash of water or dirt.
• Railgun trails.
• This is the only class that both obeys perspective and allows for a custom texture.

Properties

string sideTexture  default: "" 

Texture as viewed from the side.

string frontTexture  default: "" 

Texture as viewed from the front.

string colorMap  default: "" 

See CColorMap.

float size  default: 0.0 

The initial width of the muzzle flame.

float length  default: 0.0 

The initial length of the muzzle flame.

float sizeGrowth  default: 0.0 

By the end of its life, the muzzle flame grows to 1 + sizeGrowth times its initial size and length. The flame grows quickly at first and more slowly toward the end.

int ttl  default: 0 

How long the muzzle flame lasts.

float frontOffset  default: 0.0 

Where the frontTexture is along the length of the muzzle flame. 0 means it is in the back, 1 is in the front.

CExploSpikeProjectile

This creates a glowy spike. Note that the spike is two sided, i.e., symmetric about the position of the spawner.

Suggested Use

• Anything glowy.
• For large, slow missiles, you can try using this as an extended engine flame. Set the width to something fairly large.
• Long and thin spikes will look spiky; meanwhile, shorter and wider spikes look more blobby.
• The colors of spikes add together, so if you have several spikes and all three color channels are non-zero, it will be white in the center.
• The length growth of the spike depends on the norm of the dir vector. The spike does not grow in width.

Properties

float length  default: 0.0 

The initial length of (half) of the spike (multiplied by dir).

float lengthGrowth  default: dir.Length() * (0.5 + RandFloat() * 0.4) 

How much the length increases by per update.

float width  default: 0.0 

Half the initial width of of the spike. This is an absolute value.

float alpha  default: 0.0 

The starting alpha of the spike.

float alphaDecay  default: 0.0 

How quickly the alpha of the spike decreases.

rgb color  default: {1.0, 0.8, 0.5} 

The color of the spike.

CHeatCloudProjectile

Creates an expanding sprite. Simple but effective.

Suggested Use

• As the main background to an explosion.

Properties

float heat  default: 0.0 

Used in alpha calculations. See heatFalloff.

float maxheat  default: 0.0 

Used in alpha calculations. See heatFalloff.

float heatFalloff  default: 0.0 

This is really confusing way of representing alpha and alphaDecay. Basically alpha = heat/maxheat, and alphaDecay = heatFalloff/maxHeat.

float size  default: 0.0 

The initial radius of the heatcloud.

float sizeGrowth  default: 0.0 

The heatcloud grows by this amount every frame.

float sizeMod  default: 0.0 

The size of the heatcloud is multiplied by 1 - sizeMod.

float sizeModMod  default: 0.0 

Each frame, sizeMod is multiplied by sizeModMod.

string texture  default: "heatcloud" as referenced in resources.lua 

The texture used for the heatcloud.

CSimpleParticleSystem

Creates a sprite that can undergo complex motion. Probably the most versatile class.

Suggested Use

• Anything moving that is not doing so at constant velocity.
• If you want something that expands (or shrinks) to some size then stops, set sizeMod to something less than 1, and sizeGrowth to something positive. The particle will grow to a size equal to sizeGrowth / (1 - sizeMod) and stop. The smaller sizeMod is, the faster it will reach this size.

Properties

Initial Velocity Properties

float[3] emitVector  default: {0.0, 0.0, 0.0} 

The initial direction vector in which the particle is emitted. When spawning CEGs via EmitSfx you can make the particles go into the direction of the emiting piece with emitvector = dir. This is useful for e.g. fire coming out of a gun barrel.

float emitRot  default: 0.0 

At what angle to emit the particle relative to emitVector. 0 means that the particle will be emitted in emitVector's direction; 180 will emit the particle in the opposite direction. 90 will emit the particle in a random direction perpendicular to emitVector, which is good for creating rings.

float emitRotSpread  default: 0.0 

For each particle, a random number between 0 and emitRotSpread is added to the emitRot.

float[3] emitMul  default: {1.0, 1.0, 1.0} 

Scales the initial particle velocity; for this property, +y is considered to be in the direction of emitVector. Good if you want to create an egg-shaped explosion.

float particleSpeed  default: 0.0 

The particle's initial speed.

float particleSpeedSpread  default: 0.0 

For each particle, a random number between 0 and particleSpeedSpread is added to the particleSpeed.

Movement Properties

float[3] gravity  default: {0.0, 0.0, 0.0} 

This will be added to the particle's velocity every frame.

float airdrag  default: 0.0 

The particle's velocity is multiplied by this every frame.

Size Properties

float particleSize  default: 0.0 

The initial size of the particle.

float particleSizeSpread  default: 0.0 

For each particle, a random number between 0 and particleSizeSpread is added to the particleSize.

float sizeGrowth  default: 0.0 

How much the particle grows each frame.

float sizeMod  default: 0.0 

The size of the particle is multiplied by this each frame.

Visual Properties

bool directional  default: false 

If true, the particle will point in the direction it is moving.

string texture  default: "" 

The texture to use for the particle.

string colorMap  default: "" 

See CColorMap.

Life Properties

int numParticles  default: 0 

How many particles to create. This is not the same as count; if you spawn multiple particles using count, any CEG-Operators will be re-evaluated for each particle, whereas if you use numParticles they will not be. However, the spread properties are evaluated separately for each particle regardless of which one you use.

float particleLife  default: 0.0 

How long each particle lasts.

float particleLifeSpread  default: 0.0 

For each particle, a random number between 0 and particleLifeSpread is added to the particleLife.

CSpherePartSpawner

Draws an expanding sphere.

Suggested Use

• Looks like a shockwave.

Properties

float alpha  default: 0.0 

The alpha of the sphere.

int ttl  default: 0 

Time to live, in frames(?).

float expansionSpeed  default: 0.0 

How quickly the sphere expands.

rgb color  default: {0.0, 0.0, 0.0} 

The color of the sphere.

CSimpleGroundFlash

Draws an expanding ground texture.

Suggested Use

• A short groundflash (~8 frames) is good for any explosion that gives off light. You can also use a longer groundflash to suggest the ground is glowing from heat.

Properties

float size  default: 0.0 

The radius of the particle.

float sizeGrowth  default: 0.0 

How much the particle grows each frame.

int ttl  default: 0 

Time to live, in frames(?).

string texture  default: "" 

The texture to use for the particle.

string colorMap  default: "" 

See CColorMap.