Weapon Variables

Weapon Variable Descriptions

Variable	Description	Examples
Accuracy	How accurate a weapon is. A larger number is less accurate. If this tag is missing entirely, it has perfect accuracy unless its target moves unexpectedly. Accuracy is relative to the distance to the target; for instance, if the target is very close, even a very high accuracy value will probably still hit. If a target is very far away, even a very low accuracy value will likely cause the weapon to miss. Can be any numeric value.	accuracy=400;
AreaOfEffect	How large the weapon's impact explosion is. This affects how powerful the weapon's default impulse strength will be. Currently, BeamLasers with an AreaOfEffect of 16 or above will deform the ground at their point of impact regardless of whether it has been told not to. Can be any numeric value, but should generally be at least 8, regardless of the type of weapon.	areaofeffect=192;
Ballistic	Set to 1 for the weapon to be subjected to gravity, travelling in an arc through the air, such as cannons. Ballistic is mutually exclusive to LineOfSight and Dropped. Can be 1 or 0.	ballistic=1;
BeamLaser	Whether this weapon is a beam laser or not. Beam lasers instantly hit their targets. Rendertype must be 0. Mutually exclusive to BeamWeapon. Can be 1 or 0.	beamlaser=1;
BeamTime	How long to fire the laser before waiting for ReloadTime to start. Can be any numeric value.
BeamWeapon	Whether this weapon is a regular laser or not. BeamWeapons (lasers) do not instantly hit their targets, and are affected by the weaponvelocity tag. Mutually exclusive to BeamLaser. Can be 1 or 0.	beamweapon=1;
BurnBlow	The weapon blows up at the end of its range, only works on plasma (rendertype=4) weapons last I checked. Can be 1 or 0. A common usage is on flak guns.	burnblow=1;
Burst	How many shots are in a burst. Must be accompanied by burstrate. Can be any numeric value.	burst=3;
BurstRate	How fast the Burst fires. If set much below 0.1, it stops having any discernable effect.	burstrate=0.1
Color	An obsolete tag only recognized for compatibility purposes.	color=1;
Color2	An obsolete tag only recognized for compatibility purposes.	color=2;
CommandFire	The weapon must be manually activated for each shot. There's some confusion about whether or not it works properly. Can be set to 1 or 0.	commandfire=1;
Coverage	The range for anti-weapon weapons, like antinukes. This will be shown on the minimap as a guide. Can be any numeric value.	coverage=1280;
Dropped	Sets the weapon to be dropped, like from a bomber. Must be RenderType=6 and needs the Model tag to be specified. Mutually exclusive to Ballistic and LineOfSight. Can be set to 1 or 0.	dropped=1;
EdgeEffectiveness	Determines what percent of a weapon's maximum damage value will be applied to units as they are closer to the outer edge of the weapon's AreaOfEffect. Must have a decimal value between 0 and 1. Default in OTA was 0, probably the same in Spring.	edgeeffectiveness=0.25;
EnergyPerShot	Energy used per shot. If the specified amount of energy is not available, the weapon will not be able to shoot. Can also be used to specify how much a Stockpile weapon wll cost to build. Can be any numeric value.	energypershot=5;
FireStarter	How likely the weapon will set trees on fire. High values make trees likey to be set on fire, low values make trees likely to just explode or tip over. Can be any numeric value between 0 and 100.	FireStarter=75;
Guidance	Specifies whether or not the weapon is capable of tracking a target, can be used only on missile and torpedo weapons. Can be set to 1 or 0. See TurnRate for information on specifying how well a weapon can track a target. Requires rendertype=1, lineofsight=1, and selfprop=1;	guidance=1;
ImpulseFactor	The multiplier on the weapon's default impulsefactor, which is determined based on a weapon's default damage and AreaOfEffect. The impulse of a weapon is how strong of a kinetic force will be applied to its target or anything near the point of impact. Can be any numeric value, including negative ones.	impulsefactor=2.5;
Intensity	Alpha (brighness and washout effect) of the weapon. Can be used on any rendertype 0, 3, or 4 weapon. Can be any numeric value.	intensity=1.5;
Interceptor	Can intercept missiles with the Cruise tag.	interceptor=1;
LineOfSight	LineOfSight weapons ignore gravity and must have a direct line from the firing point to the impact point in order to be fired. Can be set to 1 or 0. Mutually exclusive to Ballistic and Dropped.	lineofsight=1;
MetalPerShot	Metal used per shot. If the specified amount is not available, the weapon cannot be fired. Can also be used to specify how much a Stockpile weapon wll cost to build. Can be set to any numeric value.	metalpershot=500;
Model	The 3DO or S3O model to be used as this weapon's physical representation. 3DO modesl do not need a .3do extension, but S3O weapon do.	model=missile;
MovingAccuracy	A weapon's accuracy while moving. See Accuracy. Can be any numeric value.	movingaccuracy=1000;
NoExplode	Whether or not the weapon will explode on impact or continue on its path. An example is the d-gun. Can be set to 1 or 0.	noexplode=1;
NoSelfDamage	This weapon will not damage the unit that fired it. For instance, a nuke silo could shoot itself and not take any damage if this was active. Can be set to 1 or 0.	noselfdamage=1;
Paralyzer	If active, this weapon will not cause any damage to its target, but will instead paralyze (aka EMP). The default damage value of a weapon with this active will be applied to the target's HP; once the HP is overwhelmed, it will be paralyzed. Can be set to 1 or 0.	paralyzer=1;
Range	The maximum range of the weapon. If set to noexplode, the weapon will disappear after this range has been met. If set to burnblow, the weapon will explode after this range has been met. Can be set to any numerical value.	range=750;
ReloadTime	The amount of time between shots. If a unit is paralyzed, this stops counting down. Can be set to any numerical value.	reloadtime=3.5;
Rendertype	The way the weapon will be displayed. Certain rendertypes are incompatibile with other tags, but it's generally for a logical reason. The rendertypes are as follows: 0 - Laser, 1 - Model, 3 - Plasma, 4 - Unit explosion (usally), 5 - Flamethrower, 6 - Dropped, 7 - Lightning. There's no documented use of rendertype=2 in OTA, and it probably doesn't do anything in Spring. 3 and 4 are usually interchangeable, both can be used to render a plasma/EMG/whatever shot; this is probably for compatibility.	rendertype=1;
RGBColor	The color of the rendertype 0, 3, 4, 7 weapon, specified in RED_GREEN_BLUE format.	rgbcolor=1 0.3 1; - this would make evul-purple
RGBColor2	The color at the core of a rendertype 0 (laser) weapon. Specified the same as above. Defaults to white.	RGBColor2=0 1 0; - this would make a weird green middle for the evul-purple laser
Selfprop	Required for Guidance tag. This weapon can propel itself and can have things like acceleration, rather than always travelling at one speed. See Guidance, StartVelocity, WeaponAcceleration, WeaponVelocity. Can be set to 1 or 0.	selfprop=1;
SmokeTrail	Does the projectile leave a smoke trail or not. Can be set to 1 or 0.	smoketrail=1;
SoundHit	The sound made whe the weapon hits. Must reference a .wav file in the .\Sounds directory.	soundhit=emghit;
SoundStart	The sound made when the weapon begins to fire. Will fire only once if the weapon is shot in a burst. Must reference a .wav file in the .\Sounds directory.	soundstart=emgfire;
SoundTrigger	If active, the weapon will sound every time a shot is fired in a burst sequence. Can be set to 1 or 0.	soundtrigger=1;
SprayAngle	How wide the the angle of a burst from a burst weapon can be. Very similar to Accuracy, except that if a weapon has no sprayangle, all the shots will be fired at the same spot, even if the weapon's aim is off.	sprayangle=1024;
StartVelocity	The starting speed of the weapon as it is first fired. Only applicable to weapons that can accelerate.	startvelocity=200;
Stockpile	Can this weapon be stockpiled, for instance like a nuke launcher. Can be set to 1 or 0.	stockpile=1;
Targetable	If active, the weapon will be automatically targeted by any Interceptor weapons.	targetable=1;
TargetMoveError	The degree to which a weapon's aiming will fail to keep up with its target's movement. If set very low or not set at all, a weapon will lead its target and almost always hit unless there's a lot of micromanagement on the part of the person controlling the target. If set too high (about 0.3 or above), the weapon will have a lot of difficulty even tracking its target enough to get a shot off. Can probably only be set between 0 and 1. Beyond 1, the weapon would be virtually useless.	targetmoveerror=0.15;
Thickness	Thickness of a beamweapon or beamlaser, default is 2. Can be set to any numerical value.	thickness=4;
ToAirWeapon	If active, the weapon will only be capable of targetting units which are flying, or are capable of flying. Can be set to 0 or 1.	toairweapon=1;
Tolerance	The amount to which the weapon's "real" aim can be off while the weapon will still be able to fire accurately at the target. This worked in OTA, but I'm not 100% sure if it works in Spring. Can be set to any numerical value.	tolerance=1500;
Tracks	Is the missile capable of tracking a target after it has completed its transition - for use with vertical-launch missiles. Can be set to 1 or 0.	tracks=1;
TrajectoryHeight	The amount that the weapon is fired upwards. I'm pretty sure this can only work on missile weapons. It is useful for compensating for mountains or debris. Can be set between 0 and 1. 0 fires straight, 1 fires at 90 degrees (directly upward). Obviously, only useful on weapons with guidance.	trajectoryheight=0.5;
Turnrate	How fast a guided weapon can turn. Can be any numerical value. If set to 0, the weapon can't turn at all, if set to 99999, the weapon can literally defy all known physics and turn 180 degrees in a fraction of a second. This is relative to a weapon's velocity; a weapon with a very low velocity (~200) wouldn't need a very high turnrate to keep up with a fighter, although it would probably never catch it because of its slow speed. A weapon with a very high velocity (~1000) would need a very high value in order to be able to hit targets that turn suddenly.	turnrate=32000;
Turret	Set to 1 if weapon is used by a turret that rotates. Set to 0 if weapon is forward firing, ie, has no rotating turret piece.	turret=1;
TwoPhase	Weapon operates in two phases... eh... yeah, I honestly have no idea what the difference between this and VLaunch is. Generally use it with VLaunch as well. Can be set to 1 or 0.	twophase=1;
VLaunch	Set to 1 to launch the weapon vertically. Can only be used with missile-type weapons with a TurnRate. Cannot be used at the same time as Turret. Set to 1 or 0.	vlaunch=1;
WaterWeapon	Does the weapon fire below water? Can be set to 1 or 0.	waterweapon=1;
WeaponAcceleration	Tells the weapon how fast it should accelerate from its StartVelocity to its actual WeaponVelocity. Increases the weapon's velocity every second by the amount specified. Can be any numerical value.	weaponacceleration=50;
WeaponTimer	How long until the weapon will go into its second phase. For use with missile weapons. For VLaunch weapons, the weapon will turn to actually go towards its target after the specified number of seconds has expired. For non-VLaunch missiles with a TurnRate, the weapon will go randomly off-course after this period of time. Can be set to any numerical value.	weapontimer=5;
WeaponVelocity	The speed the weapon moves after being fired. If StartVelocity is lower than this number, the weapon will increase speed to its WeaponVelocity at the rate specified by its WeaponAcceleration.	weaponvelocity=800;
Wobble	The amount that a missile will wobble off-course. Probably doesn't work with Guidance weapons. Requires TurnRate. Can be set to any numerical value.	wobble=15000;

Shield/Repulsor Variable Descriptions

IsShield	If set to 1, this "weapon" is no longer a weapon, is now a repulsor or a shield, based on the other properties given to it.
RepulseEnergy
RepulseForce
RepulseRange
RepulseSpeed
ShieldRepulsor	If set to 1, the "shield"-type weapon will repulse projectiles. If set to 0, it will destroy them.
SmartShield	If set to 1, the "shield"-type weapon will repulse projectiles. If set to 0, it will destroy them.