Spring on ARM: Difference between revisions
From Spring
Jump to navigationJump to search
| Line 15: | Line 15: | ||
mkdir tmp | mkdir tmp | ||
sudo mount -o loop qemu-armel.img tmp | sudo mount -o loop qemu-armel.img tmp | ||
echo "auto eth0 | |||
iface eth0 inet dhcp" >> tmp/etc/network/interfaces | |||
sudo cp tmp/boot/initrd.img* initrd.img | sudo cp tmp/boot/initrd.img* initrd.img | ||
sudo umount tmp | sudo umount tmp | ||
| Line 26: | Line 28: | ||
login with ubuntu:ubuntu | login with ubuntu:ubuntu | ||
==install required build tools== | |||
apt-get install libglew1.6-dev | |||
since here it should be possible to follow the [[Building_Spring_on_Linux#Ubuntu|linux build instructions]]. | since here it should be possible to follow the [[Building_Spring_on_Linux#Ubuntu|linux build instructions]]. | ||
[[Category:development]] | [[Category:development]] | ||
Revision as of 23:17, 2 March 2012
Setting up a virtualized environment for arm on ubuntu
see https://wiki.ubuntu.com/ARM/RootfsFromScratch
sudo apt-get install qemu-system rootstock
sudo rootstock \
--fqdn ubuntu \
--login ubuntu \
--password ubuntu \
--imagesize 3G \
--seed ubuntu-minimal,build-essential,openssh-server,linux-image-omap \
--notarball
mv qemu-armel-*.img qemu-armel.img mkdir tmp sudo mount -o loop qemu-armel.img tmp echo "auto eth0
iface eth0 inet dhcp" >> tmp/etc/network/interfaces
sudo cp tmp/boot/initrd.img* initrd.img sudo umount tmp rmdir tmp
start with:
qemu-system-arm -M versatilepb -cpu cortex-a8 -kernel ./vmlinuz \
-hda qemu-armel.img -m 256 -append "root=/dev/sda"
login with ubuntu:ubuntu
install required build tools
apt-get install libglew1.6-dev
since here it should be possible to follow the linux build instructions.
