Spring - User contributions [en]

Read Me First

2007-07-15T13:17:13Z

AndroidX: updated SpringSP link

{{lang | Germany | Zuerst lesen | Zuerst Lesen}}

 <center>'''The following will answer the most commonly-asked questions about Spring from newcomers, especially those confused by the differences between the way Total Annihilation handles things and the way Spring handles things.'''</center> 

===About Spring===
Spring is an open source project. This means everyone with programming knowledge can contribute in the project. It also means this is made in free time. 
Spring is currently in a Beta stage. This means it isn't done yet. Therefore, some things may be unclear or not user-friendly yet. (Like the GUI, which doesn't exist.) That said, Spring is still totally playable with many fan-made mods to choose from. 

===Installation (on Windows)===
* For installation on Linux, [[SetupGuide|go here]]
# Get The installer here: http://taspring.clan-sy.com/download.php or here: http://www.strategyinformer.com/pc/taspringproject/full-game/10190.html
# Spring and Total Annihilation are two completely different programs. Their files are not in any way interchangeable.
# As such, they should be installed to different directories. Spring is usually installed at C:\Program Files\Spring
# Make sure you have the latest version of Spring. The current version is [[CurrentVersion]]
# Spring it self is an engine, the program that runs the content. The content itself (the buildings, units, sounds, images) are packed in mod files. There are several mods you can play with Spring. They all have diffrent play styles. The mod: XTA comes with the installer and can be played when you have installed Spring.

===Playing===
# To play a game of Spring, you must run the TASClient.exe program. Spring itself, at this time, cannot be run directly very well.
# You can start TASClient through the start menu link it creates or by running TASClient.exe in the directory you installed Spring in.
# It is possible to play a single player game. Of course, this requires an AI to fight against. Take a look at the Bots section of this article.
 
# To chat with allies, type "a:" (without quotemarks) before your message
# Another useful commands: "e:" (chatting only with enemies), "s:" (chatting only with spectators).
 
# press F1 for seeing the heightmap (because some buildings cannot be built anywhere).
# press F2 when you want to see where the builder can build the selected unit.
# press F3 for seeing last action in the game.
# press F4 for seeing metal map (where to build metal extractors).
# press F6 to disable sounds.
# press F9 to disable units health bars.
# press F12 to take a screenshot with average JPG quality.
For more information Check Keyboard Key Layout:
[http://img108.imagevenue.com/img.php?image=03721_PK06A_Compact_Keyboard_ProdImage_Black_V2_122_972lo.jpg Spring Keyboard Layout Image]
 
# press left mouse button to select an unit.
# press left mouse button and drag, to select multiple units.
# press right mouse button to move selected units in that position where mouse is.
# press left mouse button on nothing to do nothing and deselect selected units (when selected units).

===Using Mods===
# A list of all mods can be found at: [[Mods]]
# You can download most mods from [http://www.fileuniverse.com/?p=listing&ID=92 File Universe]. or [http://spring.unknown-files.net/ Unknown Files] You should probably bookmark this page.
# To install a mod ("data set") to Spring, you just simply put the ".sd7" or ".sdz" file (or files) into your "Spring\Mods\" directory.
# Some mods have multiple files to them. For example, "Absolute Annihilation" currently contains the base mod file, then extra files for the given version being played and the desired 'mutator'. Place all these into the mod folder.
# Once a mod has been installed, restart the Spring Client, or click on the "Refresh mod list" when hosting a game. It then will appear as an option when you start a game ("Battle Screen") in TASClient.

===Using Maps===
# Maps can be found at [http://spring.unknown-files.net/ Unknown Files]. 
# This files are also ".sd7" or ".sdz" files. They may be zipped with WinZip or WinRar, to reduce the size. In that case, unzip them before placing them in the "Maps" directory in the Spring folder. 
# In the Battle Screen, use the "Reload Map list" button to use the new maps. 
# The Client can also automatically download the required map. In the Battlescreen go to "More Maps" and select a new map from the list. 

===Client===
# The purpose of TASClient is similar to the Microsoft Zone lobby, only not as pretty. You can go there to chat, start games, download maps, and basically anything Spring related.
# Private messaging is also supported through TASClient by double-clicking a person's name on the list on the right-hand side of the screen. To exit a private messaging window, right-click that person's name at the top of your screen. (next to something like "#main")
# To host a game, go to "Battle Screen" and click the "Host battle" buton. A small window pops up, allowing you to chose the mod and other settings.
# If you're in a battle, but have 'lost' your battle screen, you can get it back by hitting the "Battle Screen" button on the top-left of the main Client window. This is also where you host games from.
# There is an alternate client made by Altaric. [http://taspring.clan-sy.com/wiki/Altaric's_Lobby_Client Altaclient].

===Bots===
Bots are AI controlled players. There are several AI projects in development. Most of them are at a playable stage. 

There are bots packed with Spring, so you should already have several AI to fight against. Installing other AIs or new versions is simple as using new mods or maps. 
# Unpack the downloaded file, and place the dll files in \TAspring\ai\bot-libs. Note that some AIs require additional folders/files to work properly so read their install instructions carefully 
# Restart Spring Client if it was running. 
# Or use [http://spring.unknown-files.net/file/3208/Spring_Single_Player_Launcher_v0.9/ SpringSP], a small program that easily sets up a singleplayer game. 

A list of AIs can be found at: [[AIs]] 

Your question not answered here? Got problems? Read the [[FAQ|Frequently Asked Questions]]. 

===The Spring Forum===
[[Forum_Etiquette|Guidelines For Forum Etiquette]]

[[Category:Playing]]

Simple Game Tutorial

2007-07-15T13:14:26Z

AndroidX: updated springsp link

Until I Finish [[Mod Development]] is the place to go.

This Tutorial Aims to get a person from knowing nothing about Spring to the point where they can create and edit mods.

Right now I am working from memory so you may want to correct me when I'm wrong, I will try to cross link from my summaries to the appropriate articles available in other places.

I will not go too deep into making 3do's because they are old and dumb... but I'll try to make note of the differences here.

I don't know anything about scripting right now, so that section is likely to be sparse when I write it, I hope that someone will expand on it.

=Book 1: The First Unit=

==Step 1:Planning==
Who cares about planning, you know what you're doing... just come up with an idea for a mod... I made a chess set... if you don't have a real idea and just want to make a model show up in the game... then yeah... this is the place to start... I'd do that if I were you.

Another good thing to do at this point is to creat a "working directory", and inside it create a directory with the name that your mod will have... after many headaches I decided it's best to put this in the root directory of your system so it's really easy to find when you are switching around back and forth between folders and keep having to find your files over and over again.

==Step 2:Getting Da Tools==
You will need a bunch of stuff... here's the list (I assume you are using windows)

''Want:''
*[http://taspring.clan-sy.com/download.php Spring] - The main program, you will likely need this to test if you've screwed up
*A Tiny Map (2x2) - to test your mod fast (suggest [http://www.fileuniverse.com/?p=showitem&ID=2534 Simple Chess Map])
*[http://spring.unknown-files.net/file/3208/Spring_Single_Player_Launcher_v0.9/ SpringSP] - To load up your mod and your map in spring without confusing lobby folks

''Need:''
*'''Program listings can be found here:''' '''[http://taspring.clan-sy.com/wiki/Map%2C_Mod%2C_And_Unit_Development_Programs Map, Mod, And Unit Development Programs]'''
*3D Modeling Program - '''See above link'''
*Notepad - to edit all the miriad of text files
*A Graphical Editing Program - needs to handle RGBA TGAs (aka tga's with alpha channels), I suggest Photoshop if you have it, or The GIMP... needed for all of the texture making for UVmapping stuff... '''See above link'''
*Upspring 1.3 - To convert your models to the approprite s3o format (if you want to fight with 3do builder, then go ahead... a good trick is to get your model into upspring first and adjust all the hierachy, then save it as an 3do... but why bother?). '''See above link'''
*Scriptor - to make and compile your units "animation script"... or steal someone else's and make it work for your unit. '''See above link'''
*Compression Utility - (I suggest [http://www.7-zip.org/ 7zip] - even if you are using zip compression and not 7zip, it's still good to have)

==Step 3:Making a 3D Model==

Go into your 3D modelling program and make a 3D model, [http://taspring.clan-sy.com/w/images/b/b4/WingsCombine.PNG combine] all the objects and UV map the model, then separate it out into any parts that need to move independently of each other. Then Export the UV map as an Image File and Export the whole thing as a 3ds file. Put the original wings file, the UVMap image and the 3ds file into your working directory so you can find them later.

Wings 3D UV Mapping tutorial has been started here - [[Units:CreateModel]]

==Step 4:Fixing Your Images==

[[Basic s3o unit making guide|This Article includes a UVMapping Guide]]

Open up your UVMap in Photoshop (or whatever) go to the layer/chooser thingy and go to the Channels Tab, add a new layer (it should default to alpha) and fill it with 99% black so you can see your texture in upspring. If you want to can paint the UVmap and put white (1% black) on the alpha channel where you want your team colours to show up (you can use something between 1% and 99% to get a blend of your team colour along with the texture... for example 50% will give you your texture with 50% of the team colour mixed in...)

I don't know how to do glow maps... XXreminder for someone to create a Glowmapping tutorial... you don't acctually need one for the model to show up.

Save these images both in the working directory.

Save a copy of these images in tga format into <working directory>/<mod name>/unittextures

==Step 5:Upspring==

===Importing Your 3ds===
Open Upspring 1.3, go to file>load model and navigate to and open your 3DS model you exported, you should see the model in upspring as a 3d mesh. Go to the model tab and set the radius and height values to something other then zero... this defines where the health bar will show up, and more importantly, how big the collision sphere will be.

You will also need to use all of the other tools on those tabs to resize and rotate and move your model to the right place... wings makes models that are 90 degrees off and about 30 times smaller than most spring models... make sure you click the "apply transform" button after any changes that you actually want to show up in the game.

Also, you will want to make the hierachy work using the cut, paste, and add empty buttons. You will need an object called "base" that all the other objects are connected to... the "origin object"... sometimes you get lucky and wings exports it properly... usually not.

===Importing Your UV and Glowmaps===

Go to the textures tab and make your UV/texture/team-colour map as "texture1" and your UV/glow/reflectivity map as "texture2"... it should show up correctly in the preview pane.

===Exporting Your s3o===
Choose File>Save Model As then in the drop down select "s3o" and type an appropriate name. This model should be saved to your working directory, and a copy of it made to <working directory>/<mod name>/3dobjects/

==Step 6:A couple Text Files==

===UnitName.fbi===
For Reference visit [[Units:FBI]], but again, the easiest way to do this is to extract an existing mod and find the fbi for a unit that behaves similarly to the one you are trying to make and rename and modify it.

Some More Specific Information Not Clear in the "Units:FBI" article:

'''Name+" "+Description=Spring Display Name'''

So if you have the following settings:

Name=Tiger;
Description=Fast Attack C.A.T.;

The Tooltip will show "Tiger Fast Attack C.A.T."

'''BuildPic Defaults to UnitName.bmp'''

So if you leave out "BuildPic=filename.bmp;" Spring will look in /unitpics/ for a file called "UnitName.bmp" to use as your buildpic.

'''ObjectName'''

If you want to use an s3o object, you will need to specify with "ObjectName=UnitName'''.S3O;'''" otherwise it will look for "UnitName.3do". Also, you don't have to use "UnitName" as the filename and, in fact, multiple Unit's fbi files can reference the same 3D models. It is easier, however, for people to figure out what you are doing in your mod if you follow the standards.

Save this file as plain text in <working directory>/<mod name>/units/

===modinfo.tdf===

modinfo.tdf is a text file that defines a number of things that are used when loading a mod, most of the information is self explanitory but basically what you are doing is defining what is going to show up in whatever mod-selection interface you use as well as what other files need to be loaded into memory in order for your mod to work.

====Making a New Mod with your unit/units====
The following is an example of what will be in your modinfo.tdf file if you are starting from scratch and making your own mod. This is also good when you are just testing one unit to see if it works.

[MOD] {

// The name is shown in the selection interface
Name=My Mod;

// These can be shown by the selection interface
Description=My Mod That I Made;
URL=http://www.theplacepeoplecangetthelatestversionofyourmod.com;

// What kind of mod this is
// 0 - Hidden (support mod that can't be selected, such as OTA_textures)
// 1 - Normal, only one can be selected at a time
// 2 - Addon, any number of these can be selected. Could be used
// for single units for example.
// others - perhaps mutators and addon races that can be
// enabled in addition to xta for example?
ModType=1;

// Number of other archives this one depends on
NumDependencies=4;
Depend0=taenheter.sdz;
Depend1=springcontent.sdz;
Depend2=otacontent.sdz;
Depend3=tatextures.sdz;

// Number of other archives this one replaces
}

====Adding Your Unit to an Existing Mod====
The following is an example of what will be in your modinfo.tdf file if you are adding new units to an existing mod (in this case xta_se_v066.sdz), this is good for adding units to the build tree of an existing mod or adding a whole new team.

// Description of the mod control file recognized by spring:

[MOD] {

// The name is shown in the selection interface
Name=XTASEv0.66 with+My Units;

// These can be shown by the selection interface
//
Description=xta_se_v066 with the cool tank I made;
URL=http://www.fileuniverse.com/exactlocationblahblahblah;

// What kind of mod this is
// 0 - Hidden (support mod that can't be selected, such as OTA_textures)
// 1 - Normal, only one can be selected at a time
// 2 - Addon, any number of these can be selected. Could be used
// for single units for example.
// others - perhaps mutators and addon races that can be
// enabled in addition to xta for example?
ModType=1;

// Number of other archives this one depends on
NumDependencies=5;
Depend0=taenheter.sdz;
Depend1=springcontent.sdz;
Depend2=otacontent.sdz;
Depend3=tatextures.sdz;
Depend4=xta_se_v066.sdz;

// Number of other archives this one replaces
}

There are some extra bits in these examples, but I work on the "better safe than sorry" principle... which is to wait for someone who knows what they are doing to fix my articles.

You will want to save this file as plain text in <working directory>/<mod name>/

===Armor.txt===

I'm not exactly sure how this works, but the file needs to exist, so either steal one from another mod and modify it... or just make a file that looks like this.

// [UNITNAME]- Good Against Lazer/Bad Against Nukes
[UNITNAME]
{
}

You will want to save this file as plain text in <working directory>/<mod name>/

===SIDEDATA.TDF===

Start by stealing the sidedata.tdf file from your dependency mod if you have one, then edit it to include your units/side.

Basically this file is in the form:

[SIDE0]
{
name=Good Guys;
nameprefix=GG;
commander=UnitName1;
}
[CANBUILD]
{
[UnitName1]
{
canbuild1=UnitName2;
canbuild2=UnitName3;
canbuild3=UnitName4;
canbuild4=UnitName5;
canbuild5=UnitName6;
}
}

...with additional "[SIDEX]" entries for each side/team/commander-choice available in the mod-selector you choose, additional "[UnitName]" sections for each factory of construction unit, and additional "canbuildx=UnitName" entries to all factory/con-units that can build each unit.

You will save this file as plain text in <working directory>/<mod name>/gamedata/

==Step 7:Adding a Build Pic==

Add a 96x96 BMP to your <working directory>/<mod name>/unitpics/ folder named either "UnitName.bmp" or whatever you specified in the "BuildPic=" line of your fbi.

==Step 8:Adding a Side Pic==

Add a 16x16 BMP to your <working directory>/<mod name>/sidepics/ folder named "teamname.bmp" or whatever you specified in the "name=" line of your SIDEDATA.TDF for each side/team you have added.

==Step 9:Scriptor==

===Stealing a Script===
Open someone else's script in scriptor that works the way you want your script to work, look at the top where it's talking about "piece names"... then change those piece names to be the piece names of your unit and do a find/replace to make all the places where those pieces show up to be your pieces too. Compile it so its name is the same as the "UnitName=" value in your "UnitName.fbi".

XXreminder to someone to link to a proper scripting tutorial

Put the bos and cob files for your unit script in <working directory>/<mod name>/scripts

==Step 10:Compiling Your Mod==

You may want to check your mod directory and make sure it follows the structure defined [[Mod_Development:Archives|here]].

navigate to your <working directory>/<mod name> and select everything and choose "add to archive <mod name>.7z".

make a copy of this file called <mod name>v0.7z in your working directory so you don't screw anything up later, then make a copy of it called <mod name>.sd7 in the mods directory of spring.

==Step 11:Testing Your Mod==
Open Up SpringSP, pick your mod from the drop-down at the top (if it doesn't show up you screwed up your modinfo.txt), choose your tiny map from the map list and press start. If it doesn't break and your unit shows up, you have created all the neccessary files... yay!

Gotchas:
*If it doesn't work, check you didn't zip the folder itself, but the contents, ie if you open mymod.sd7 with 7zip, you should see folders such as "unittextures" rather than a folder "mymod" containing unittextures.

[[Category:Mod development]]

Read Me First

2007-01-17T19:45:00Z

AndroidX: updating springsp's link again

{{lang | Germany | Zuerst lesen | Zuerst Lesen}}

 <center>'''The following will answer the most commonly-asked questions about Spring from newcomers, especially those confused by the differences between the way Total Annihilation handles things and the way Spring handles things.'''</center> 

===About Spring===
Spring is an open source project. This means everyone with programming knowledge can contribute in the project. It also means this is made in free time. 
Spring is currently in a Beta stage. This means it isn't done yet. Therefore, some things may be unclear or not user-friendly yet. (Like the GUI, which doesn't exist.) That said, Spring is still totally playable with many fan-made mods to choose from. 

===Installation (on Windows)===
# Get The installer here: http://taspring.clan-sy.com/download.php or here: http://www.strategyinformer.com/pc/taspringproject/full-game/10190.html
# Spring and Total Annihilation are two completely different programs. Their files are not in any way interchangeable.
# As such, they should be installed to different directories. Spring is usually installed at C:\Program Files\TASpring
# Make sure you have the latest version of Spring. The current version is {{CurrentVersion}}
# Spring it self is an engine, the program that runs the content. The content itself (the buildings, units, sounds, images) are packed in mod files. There are several mods you can play with Spring. They all have diffrent play styles. The mod: XTA comes with the installer and can be played when you have installed Spring.

===Playing===
# To play a game of Spring, you must run the TASClient.exe program. Spring itself, at this time, cannot be run directly very well.
# You can start TASClient through the start menu link it creates or by running TASClient.exe in the directory you installed Spring in.
# It is possible to play a single player game. Of course, this requires an AI to fight against. Take a look at the Bots section of this article.
 
# To chat with allies, type "a:" (without quotemarks) before your message
# Another useful commands: "e:" (chatting only with enemies), "s:" (chatting only with spectators).
 
# press F1 for seeing the heightmap (because some buildings cannot be built anywhere).
# press F2 when you want to see where the builder can build the selected unit.
# press F3 for seeing last action in the game.
# press F4 for seeing metal map (where to build metal extractors).
# press F6 to disable sounds.
# press F9 to disable units health bars.
# press F12 to take a screenshot with average JPG quality.
 
# press left mouse button to select an unit.
# press left mouse button and drag, to select multiple units.
# press right mouse button to move selected units in that position where mouse is.
# press left mouse button on nothing to do nothing and deselect selected units (when selected units).

===Using Mods===
# A list of all mods can be found at: [[Mods]]
# You can download most mods from [http://www.fileuniverse.com/?p=listing&ID=92 File Universe]. You should probably bookmark this page.
# To install a mod ("data set") to Spring, you just simply put the ".sd7" or ".sdz" file (or files) into your "Spring\Mods\" directory.
# Some mods have multiple files to them. For example, "Absolute Annihilation" currently contains the base mod file, then extra files for the given version being played and the desired 'mutator'. Place all these into the mod folder.
# Once a mod has been installed, restart the Spring Client, or click on the "Refresh mod list" when hosting a game. It then will appear as an option when you start a game ("Battle Screen") in TASClient.

===Using Maps===
# Maps, like mods, can be found at [http://www.fileuniverse.com/?p=listing&ID=121 File Universe] and [http://www.unknown-files.net/index.php?page=browse&cat=1&subcat=4 Unknown Files]. 
# This files are also ".sd7" or ".sdz" files. They may be zipped with WinZip or WinRar, to reduce the size. In that case, unzip them before placing them in the "Maps" directory in the Spring folder. 
# In the Battle Screen, use the "Reload Map list" button to use the new maps. 
# The Client can also automatically download the required map. In the Battlescreen go to "More Maps" and select a new map from the list. 

===Client===
# The purpose of TASClient is similar to the Microsoft Zone lobby, only not as pretty. You can go there to chat, start games, download maps, and basically anything Spring related.
# Private messaging is also supported through TASClient by double-clicking a person's name on the list on the right-hand side of the screen. To exit a private messaging window, right-click that person's name at the top of your screen. (next to something like "#main")
# To host a game, go to "Battle Screen" and click the "Host battle" buton. A small window pops up, allowing you to chose the mod and other settings.
# If you're in a battle, but have 'lost' your battle screen, you can get it back by hitting the "Battle Screen" button on the top-left of the main Client window. This is also where you host games from.
# There is an alternate client made by Altaric. [http://taspring.clan-sy.com/wiki/Altaric's_Lobby_Client Altaclient].

===Bots===
Bots are AI controlled players. There are several AI projects in development. Most of them are at a playable stage. 

There are bots packed with Spring, so you should already have several AI to fight against. Installing other AIs or new versions is simple as using new mods or maps. 
# Unpack the downloaded file, and place all the files in \TAspring\aidll\globalai 
# Restart Spring Client if it was running. 
# Or use [http://spring.unknown-files.net/?page=browse&dlid=2012 SpringSP], a small program that easily sets up a singleplayer game. 

A list of AIs can be found at: [[AIs]] 

Your question not answered here? Got problems? Read the [[FAQ|Frequently Asked Questions]]. 

[[Category:Playing]]

Read Me First

2006-12-13T11:57:25Z

AndroidX: updating link to SpringSP

{{lang | Germany | Zuerst lesen | Zuerst Lesen}}

 <center>'''The following will answer the most commonly-asked questions about Spring from newcomers, especially those confused by the differences between the way Total Annihilation handles things and the way Spring handles things.'''</center> 

===About Spring===
Spring is an open source project. This means everyone with programming knowledge can contribute in the project. It also means this is made in free time. 
Spring is currently in a Beta stage. This means it isn't done yet. Therefore, some things may be unclear or not user-friendly yet. (Like the GUI, which doesn't exist.) That said, Spring is still totally playable with many fan-made mods to choose from. 

===Installation (on Windows)===
# Get The installer here: http://taspring.clan-sy.com/download.php
# Spring and Total Annihilation are two completely different programs. Their files are not in any way interchangeable.
# As such, they should be installed to different directories. Spring is usually installed at C:\Program Files\TASpring
# Make sure you have the latest version of Spring. The current version is {{CurrentVersion}}
# Spring it self is an engine, the program that runs the content. The content itself (the buildings, units, sounds, images) are packed in mod files. There are several mods you can play with Spring. They all have diffrent play styles. The mod: XTA comes with the installer and can be played when you have installed Spring.

===Playing===
# To play a game of Spring, you must run the TASClient program. Spring itself, at this time, cannot be run directly very well. 
# You can start TASClient through the start menu link it creates or by running TASClient.exe in the directory you installed Spring in. 
# It is possible to play a single player game. Of course, this requires an AI to fight against. Take a look at the Bots section of this article. 

===Using Mods===
# A list of all mods can be found at: [[Mods]]
# You can download most mods from [http://www.fileuniverse.com/?p=listing&ID=92 File Universe]. You should probably bookmark this page.
# To install a mod ("data set") to Spring, you just simply put the ".sd7" or ".sdz" file (or files) into your "Spring\Mods\" directory.
# Some mods have multiple files to them. For example, "Absolute Annihilation" currently contains the base mod file, then extra files for the given version being played and the desired 'mutator'. Place all these into the mod folder.
# Once a mod has been installed, restart the Spring Client, or click on the "Refresh mod list" when hosting a game. It then will appear as an option when you start a game ("Battle Screen") in TASClient.

===Using Maps===
# Maps, like mods, can be found at [http://www.fileuniverse.com/?p=listing&ID=121 File Universe] and [http://www.unknown-files.net/index.php?page=browse&cat=1&subcat=4 Unknown Files]. 
# This files are also ".sd7" or ".sdz" files. They may be zipped with WinZip or WinRar, to reduce the size. In that case, unzip them before placing them in the "Maps" directory in the Spring folder. 
# In the Battle Screen, use the "Reload Map list" button to use the new maps. 
# The Client can also automatically download the required map. In the Battlescreen go to "More Maps" and select a new map from the list. 

===Client===
# The purpose of TASClient is similar to the Microsoft Zone lobby, only not as pretty. You can go there to chat, start games, download maps, and basically anything Spring related.
# Private messaging is also supported through TASClient by double-clicking a person's name on the list on the right-hand side of the screen. To exit a private messaging window, right-click that person's name at the top of your screen. (next to something like "#main")
# To host a game, go to "Battle Screen" and click the "Host battle" buton. A small window pops up, allowing you to chose the mod and other settings.
# If you're in a battle, but have 'lost' your battle screen, you can get it back by hitting the "Battle Screen" button on the top-left of the main Client window. This is also where you host games from.
# There is an alternate client made by Altaric. [http://taspring.clan-sy.com/wiki/Altaric's_Lobby_Client Altaclient].

===Bots===
Bots are AI controlled players. There are several AI projects in development. Most of them are at a playable stage. 

There are bots packed with Spring, so you should already have several AI to fight against. Installing other AIs or new versions is simple as using new mods or maps. 
# Unpack the downloaded file, and place all the files in \TAspring\aidll\globalai 
# Restart Spring Client if it was running. 
# Or use [http://www.unknown-files.net/index.php?page=browse&dlid=2012 SpringSP], a small program that easily sets up a singleplayer game. 

A list of AIs can be found at: [[AIs]] 

Your question not answered here? Got problems? Read the [[FAQ|Frequently Asked Questions]]. 

[[Category:Playing]]

Read Me First

2006-10-09T07:27:47Z

AndroidX: updating link to springsp

{{lang | Germany | Zuerst lesen | Zuerst Lesen}}

 <center>'''The following will answer the most commonly-asked questions about Spring from newcomers, especially those confused by the differences between the way Total Annihilation handles things and the way Spring handles things.'''</center> 

===About Spring===
Spring is an open source project. This means everyone with programming knowledge can contribute in the project. It also means this is made in free time. 
Spring is currently in a Beta stage. This means it isn't done yet, nor in a releasable stage. Therefore, some things may be unclear or not user-friendly yet. (Like the GUI, which doesn't exist.) That said, Spring is still totally playable with many fan-made mods to choose from. 

===Installation===
# Get The installer here: http://taspring.clan-sy.com/download.php 
# Spring and Total Annihilation are two completely different programs. Their files are not in any way interchangeable. 
# As such, they should be installed to different directories. Spring is usually installed at C:\Program Files\TASpring 
# Make sure you have the latest version of Spring. The current version is {{CurrentVersion}} 
# Spring it self is an engine, the program that runs the content. The content itself (the buildings, units, sounds, images) are packed in mod files. There are several mods you can play with Spring. They all have diffrent play styles. The mod: XTA comes with the installer and can be played when you have installed Spring. 

===Playing===
# To play a game of Spring, you must run the TASClient program. Spring itself, at this time, cannot be run directly very well. 
# You can start TASClient through the start menu link it creates or by running TASClient.exe in the directory you installed Spring in. 
# It is possible to play a single player game. Of course, this requires an AI to fight against. Take a look at the Bots section of this article. 

===Using Mods===
# A list of all mods can be found at: [[Mods]]
# You can download most mods from [http://www.fileuniverse.com/?p=listing&ID=92 File Universe]. You should probably bookmark this page.
# To install a mod ("data set") to Spring, you just simply put the ".sd7" or ".sdz" file (or files) into your "Spring\Mods\" directory.
# Some mods have multiple files to them. For example, "Absolute Annihilation" currently contains the base mod file, then extra files for the given version being played and the desired 'mutator'. Place all these into the mod folder.
# Once a mod has been installed, restart the Spring Client, or click on the "Refresh mod list" when hosting a game. It then will appear as an option when you start a game ("Battle Screen") in TASClient. 

===Using Maps===
# Maps, like mods, can be found at [http://www.fileuniverse.com/?p=listing&ID=121 File Universe] and [http://www.unknown-files.net/index.php?page=browse&cat=1&subcat=4 Unknown Files]. 
# This files are also ".sd7" or ".sdz" files. They may be zipped with WinZip or WinRar, to reduce the size. In that case, unzip them before placing them in the "Maps" directory in the Spring folder. 
# In the Battle Screen, use the "Reload Map list" button to use the new maps. 
# The Client can also automatically download the required map. In the Battlescreen go to "More Maps" and select a new map from the list. 

===Client===
# The purpose of TASClient is similar to the Microsoft Zone lobby, only not as pretty. You can go there to chat, start games, download maps, and basically anything Spring related. 
# Private messaging is also supported through TASClient by double-clicking a person's name on the list on the right-hand side of the screen. To exit a private messaging window, right-click that person's name at the top of your screen. (next to something like "#main") 
# To host a game, go to "Battle Screen" and click the "Host battle" buton. A small window pops up, allowing you to chose the mod and other settings. 
# If you're in a battle, but have 'lost' your battle screen, you can get it back by hitting the "Battle Screen" button on the top-left of the main Client window. This is also where you host games from. 
# There is an alternate client made by Altaric. [http://taspring.clan-sy.com/wiki/Altaric's_Lobby_Client Altaclient]. 

===Bots===
Bots are AI controlled players. There are several AI projects in development. Most of them are at a playable stage. 

There are bots packed with Spring, so you should already have several AI to fight against. Installing other AIs or new versions is simple as using new mods or maps. 
# Unpack the downloaded file, and place all the files in \TAspring\aidll\globalai 
# Restart Spring Client if it was running. 
# Or use [http://www.unknown-files.net/index.php?page=browse&dlid=1797 SpringSP], a small program that easily sets up a singleplayer game. 

A list of AIs can be found at: [[AIs]] 

Your question not answered here? Got problems? Read the [[FAQ|Frequently Asked Questions]]. 

[[Category:Playing]]

Read Me First

2006-09-09T00:04:07Z

AndroidX:

{{lang | Germany | Zuerst lesen | Zuerst Lesen}}

 <center>'''The following will answer the most commonly-asked questions about Spring from newcomers, especially those confused by the differences between the way Total Annihilation handles things and the way Spring handles things.'''</center> 

===About Spring===
Spring is an open source project. This means everyone with programming knowledge can contribute in the project. It also means this is made in free time. 
Spring is currently in a Beta stage. This means it isn't done yet, nor in a releasable stage. Therefore, some things may be unclear or not user-friendly yet. (Like the GUI, which doesn't exist.) That said, Spring is still totally playable with many fan-made mods to choose from. 

===Installation===
# Get The installer here: http://taspring.clan-sy.com/download.php 
# Spring and Total Annihilation are two completely different programs. Their files are not in any way interchangeable. 
# As such, they should be installed to different directories. Spring is usually installed at C:\Program Files\TASpring 
# Make sure you have the latest version of Spring. The current version is {{CurrentVersion}} 
# Spring it self is an engine, the program that runs the content. The content itself (the buildings, units, sounds, images) are packed in mod files. There are several mods you can play with Spring. They all have diffrent play styles. The mod: XTA comes with the installer and can be played when you have installed Spring. 

===Playing===
# To play a game of Spring, you must run the TASClient program. Spring itself, at this time, cannot be run directly very well. 
# You can start TASClient through the start menu link it creates or by running TASClient.exe in the directory you installed Spring in. 
# It is possible to play a single player game. Of course, this requires an AI to fight against. Take a look at the Bots section of this article. 

===Using Mods===
# A list of all mods can be found at: [[Mods]]
# You can download most mods from [http://www.fileuniverse.com/?p=listing&ID=92 File Universe]. You should probably bookmark this page.
# To install a mod ("data set") to Spring, you just simply put the ".sd7" or ".sdz" file (or files) into your "Spring\Mods\" directory.
# Some mods have multiple files to them. For example, "Absolute Annihilation" currently contains the base mod file, then extra files for the given version being played and the desired 'mutator'. Place all these into the mod folder.
# Once a mod has been installed, restart the Spring Client, or click on the "Refresh mod list" when hosting a game. It then will appear as an option when you start a game ("Battle Screen") in TASClient. 

===Using Maps===
# Maps, like mods, can be found at [http://www.fileuniverse.com/?p=listing&ID=121 File Universe] and [http://www.unknown-files.net/index.php?page=browse&cat=1&subcat=4 Unknown Files]. 
# This files are also ".sd7" or ".sdz" files. They may be zipped with WinZip or WinRar, to reduce the size. In that case, unzip them before placing them in the "Maps" directory in the Spring folder. 
# In the Battle Screen, use the "Reload Map list" button to use the new maps. 
# The Client can also automatically download the required map. In the Battlescreen go to "More Maps" and select a new map from the list. 

===Client===
# The purpose of TASClient is similar to the Microsoft Zone lobby, only not as pretty. You can go there to chat, start games, download maps, and basically anything Spring related. 
# Private messaging is also supported through TASClient by double-clicking a person's name on the list on the right-hand side of the screen. To exit a private messaging window, right-click that person's name at the top of your screen. (next to something like "#main") 
# To host a game, go to "Battle Screen" and click the "Host battle" buton. A small window pops up, allowing you to chose the mod and other settings. 
# If you're in a battle, but have 'lost' your battle screen, you can get it back by hitting the "Battle Screen" button on the top-left of the main Client window. This is also where you host games from. 
# There is an alternate client made by Altaric. [http://taspring.clan-sy.com/wiki/Altaric's_Lobby_Client Altaclient]. 

===Bots===
Bots are AI controlled players. There are several AI projects in development. Most of them are at a playable stage. 

There are bots packed with Spring, so you should already have several AI to fight against. Installing other AIs or new versions is simple as using new mods or maps. 
# Unpack the downloaded file, and place all the files in \TAspring\aidll\globalai 
# Restart Spring Client if it was running. 
# Or use [http://www.fileuniverse.com/?p=showitem&ID=3779 SpringSP], a small program that easily sets up a singleplayer game. 

A list of AIs can be found at: [[AIs]] 

Your question not answered here? Got problems? Read the [[FAQ|Frequently Asked Questions]]. 

[[Category:Playing]]